9.2
GD36M GLASS FRONT INSTALLATION / REMOVAL
FLAT PLASTIC
WASHER
PLASTIC
SHOULDER
WASHER
CAP
9.2.1
NOTE: Ensure threaded
rod is completely threaded
into the cap.
Place plastic shoulder washer
over threaded rod.
Run the rod through the hole in
9.2.2
the glass facia (silk screen side
toward appliance).
Place fl at plastic washer over
9.2.3
threaded rod.
Place bracket over threaded rod with
9.2.4
it's return fl ange towards the center of
the glass and secure with the hex nut
(use tool provided to hold the cap). CAUTION: Do not over tighten.
Lift the glass facia and engage tabs into slots on front panel of the appliance.
9.2.5
THREADED
ROD
GLASS
FACIA
BRACKET
FRONT
PANEL
HEX NUT
45
W415-0899 / 06.01.10