Inspecting With The Edge Width Inspection Item - Omron Z302-E1-03 User Manual

4-6 Inspecting with the Edge Width Inspection Item

Edge Width Inspection Item
This inspection item is used to measure dimensions. Places where the color changes greatly are called edges.
The distance between two edges is called the edge width.
Setup Procedure for Edge Width Inspection Item
Step 1 Selecting the Inspection Item
− [Inspection]
[Inspect]
1
Press an unused inspection item number and press
[Add item.].
2
Press [Edge Width].
Registering inspection items: p. 50
64

Inspecting with the Edge Width Inspection Item

Sample Settings
Measurement region
Color of edge to be found
Sample Measurement
Edges are searched from
two directions and the
distance is calculated.
OK NG
FQ User's Manual