Using The Recoil Starter - KYMCO MXU 500 Owner's Manual

NOTE:
If the engine fails to start, release the start
switch, then push the start switch again.
Each cranking should be as short as
possible to preserve battery energy. Do not
crank the engine more than 10 seconds on
each attempt.
If the battery is discharged, pull the recoil
starter to start the engine.
8. If the engine is started with the choke knob in
position 1, the choke knob should be
returned to position 2 to warm up the engine.
If the engine is started with the choke knob in
position 2, keep the choke knob in this
position to warm up the engine.
9. Continue warming up the engine until it idles
smoothly and return the choke knob to
position 3 before riding.

Using the recoil starter

The recoil starter is used to start the engine
when the battery is low.
(1) Recoil starter
61
(1)