Rear Gear Box Oil
Change the oil in the rear gear box case when specified by the Maintenance Schedule. Change the
oil with the rear gear box warm, and the ATV on level ground to assure complete and rapid draining.
Rear gear box oil replacement
1. Remove the two bolts (1) on the skid plate (2) right/left side and two bolts (3) under the skid
plate, remove skid plate.(MXU 500 version)
2.To drain the oil, first place an oil drain pan under the oil drain plug (4).(MXU 500 version)
3.To drain the oil, first place an oil drain pan under the oil drain plug (5).(MXU 500 IRS version)
(1)
(2)
(1) Bolts (on the skid plate)
(2) Skid plate
(3) Bolts (under the skid plate)
(3)
(1)
(5)
(5) Oil drain plug
125
(4)
(4) Oil drain plug