Wheel Removal; Wheel Installation - KYMCO MXU 500 Owner's Manual

WHEEL REMOVAL

1. Elevate the wheel by placing a suitable stand
under the frame.
2. Remove the nuts from the wheel.
3. Remove the wheel assembly.
(1)
(1) Wheel nuts
(1)
MXU 500
MXU 500 IRS
144

WHEEL INSTALLATION

When reinstalling a wheel, tighten the wheel
nuts in a crisscross (rather than a circular)
pattern. Be sure the tapered side of the wheel
nuts (1) face the wheel rim (2).
Wheel nut torque:MXU 500
Front: 65 N-m (6.5 kgf-m, 46 lbf-ft)
Rear: 65 N-m (6.5 kgf-m, 46 lbf-ft)
Wheel nut torque:MXU 500 IRS
Front: 55 N-m (5.5 kgf-m, 39.6 lbf-ft)
Rear: 55 N-m (5.5 kgf-m, 39.6 lbf-ft)
Be sure the tapered side of the wheel nuts (1)
face the wheel rim (2).
(1) Wheel nut
OK
(1)
(2)
(2) Wheel rim