Fuse Replacement - KYMCO MXU 500 Owner's Manual

FUSE REPLACEMENT

The fuse box (1) stored in the battery
compartment under the seat.
To replace a fuse:
1. Make sure the ignition switch is OFF.
CAUTION:
To prevent accidental short-circuiting, turn
off the main switch when checking or
replacing a fuse.
(1) Fuse box (2) Fuse box cap
2. Remove the seat
3. Open the fuse box cap (2).
4. Pull the old fuse out of the fuse holder.
5. Push the new fuse in to the fuse holder.
6. Close the fuse box cap and install seat.
POTENTIAL HAZARD
Using an improper fuse.
(2) (2)
WHAT CAN HAPPEN
An improper fuse can cause damage to the
electrical system which could lead to a fire.
HOW TO AVOID THE HAZARD
(1)
Always use a fuse of the specified rating.
Never use a material in place of the proper
fuse.
148
(page 39)
WARNING
Fuse specifications