Wheel Removal; Wheel Installation - KYMCO MXU 500 Owner's Manual

WHEEL REMOVAL

1. Elevate the wheel by placing a suitable stand
under the frame.
2. Remove the nuts from the wheel.
3. Remove the wheel assembly.
(1) Wheel nuts
(1)

WHEEL INSTALLATION

When reinstalling a wheel, tighten the wheel
nuts in a crisscross (rather than a circular)
pattern. Be sure the tapered side of the wheel
nuts (1) face the wheel rim (2).
Wheel nut torque:
Front: 45 N-m (4.5 kgf-m, 32 lbf-ft)
Rear: 45 N-m (4.5 kgf-m, 32 lbf-ft)
Be sure the tapered side of the wheel nuts (1)
face the wheel rim (2).
(1) Wheel nut
132
OK
(2)
(2) Wheel rim
(1)