Removing The Front Wheel (4-Wheeler Version) - Invacare Scooter User Manual

10.1.1.2 Removing the front wheel (4-wheeler version)

Requirements:
Open spanner, 17 mm.
Rubber hammer
Jack the scooter up and place a wooden block or similar
under it to support it.
Remove the wheel locknut (1) with a 17 mm open-ended
spanner.
Remove wheel. It may be necessary to carefully free the
wheel off the axle by tapping lightly with the rubber hammer
on the rear face of the wheel
Reassembly
Reassembly takes place in reverse order. Make sure that you refit the wheel on the same side
and for the same direction of travel as previously.
51