Installation - Sanyo PLV-55WHD1 Service Manual

■ Installation

Placing and Settling the LCD Projection TV
CAUTION;
When placing the LCD Projection TV, the spaces
for ventilation must be maintained.
SIDE and TOP
8"
(20cm)
Air Circulation
The openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and protect it from
overheating, these openings must not be blocked or
covered.
● Take appropriate space on the top, sides and rear of the
LCD Projection TV cabinet for allowing air circulation and
cooling the LCD Projection TV . Minimum distance should
be taken. If the LCD Projection TV is to be built into a
compartment or similarly enclosed, the minimum
distances must be maintained. Do not cover the
ventilation slot on the LCD Projection TV . Heat build-up
can reduce the service life of your LCD Projection TV , and
can also be dangerous.
Place the LCD Projection TV on flat places or with an exclusive
LCD Projection TV stand. Placing on uneven places may cause
picture tilt or distortion.
Do not place the LCD Projection TV under direct sunlight. This may
have a damaging effect on picture quality and the screen surface
of the LCD Projection TV.
4" (10cm)
- 7 -
REAR
8"
(20cm)
BE SURE TO USE OR PLACE THE LCD
PROJECTION TV IN THE TEMPERATURE
INDICATED BELOW:
Operating Temperature
Storage Temperature
RECOMMENDATION
Throughout the installation process, handling by more
than two people is recommended.
4"
(10cm)
41°F ~ 95°F (5°C ~ 35°C)
14°F ~ 140°F (-10°C ~ 60°C)