Mechanical disassemblies
28
Optical base-top removal.
1. Remove the 9 Screws(T3x10) and remove the Optical base-top.
Optical base -top
Fig. 28
29
-1 Optical parts removal.
1. Remove the Mirror(W) and stopper mirror-A, stopper mirror-B upward.
2. Remove the Integrator Lens(IN) and stopper-C upward.
3. Remove the Shield plate(beam) upward.
4. Remove the Integrator Lens(OUT) and stopper-C upward.
Stopper-C
Stopper mirror-B
Stopper mirror-A
Stopper-C
Mirror(W)
Integrator Lens(IN)
Integrator Lens(OUT)
Shield plate(beam)
Fig. 29-1a
- 42 -