Sanyo PLV-55WHD1 Service Manual page 14

Lcd projection tv hd pro series
Hide thumbs Also See for PLV-55WHD1:
Table of Contents

Advertisement

Lamp Replacement
ORDER REPLACEMENT LAMP
Replacement lamp can be ordered through your dealer. When ordering a projection lamp, give the following
information to the dealer.
● Model No. of your LCD Projection TV
● Replacement Lamp Type No.
This LCD Projection TV uses a high-pressure lamp which must be handled carefully and properly. Improper handling
may result in accidents, injury, or create a fire hazard.
● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the
same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other
similar lamps.
● If the LCD Projection TV indicates that the lamp should be replaced, i.e., if the LAMP REPLACE indicator lights up,
replace the lamp with a new one IMMEDIATELY after the LCD Projection TV has cooled down.
( Follow carefully the instructions in the Lamp Replacement section of this manual.) Continuous use of the lamp
with the LAMP REPLACE indicator lighted may increase the risk of lamp explosion.
● A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws
to an end. Risk of explosion may differ according to the environment or conditions in which the LCD Projection TV
and lamp are being used.
IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.
If a lamp explodes, disconnect the LCD Projection TV's AC plug from the AC outlet immediately. Contact an author-
ized service station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that
there are no broken shards or pieces of glass around the LCD Projection TV or coming out from the cooling air circu-
lation holes. Any broken shards found should be cleaned up carefully. No one should check the inside of the LCD
Projection TV except those who are authorized trained technicians and who are familiar with LCD Projection TV serv-
ice. Inappropriate attempts to service the unit by anyone, especially those who are not appropriately trained to do so,
may result in an accident or injury caused by pieces of broken glass.
:
PLV-55WHD1 / PLV-65WHD1
:
POA-LMP96
(Service Parts No. 610 322 7382)
- 14 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

Plv-65whd1

Table of Contents