Glass Media Installation - Napoleon LHD50N Installation And Operating Instructions Manual

38
6.2

GLASS MEDIA INSTALLATION

CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
Evenly spread the glass media onto the media tray, ensuring no glass media falls onto the burner. If this hap-
pens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass can
be purchased from your local authorized dealer / distributor.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing around the burner.
CLEANING CRYSTALS
To help maintain the luster and beauty of these crystals over time, carefully polish them by using a soft, lint-
free cloth. If they become heavily soiled, you may use a mild detergent and wash them individually by hand, as
you would a fi ne chandelier. Please avoid rubbing the crystals together. Do not use a dishwasher.
NOTE: Care must be taken to ensure glass embers are kept clear of the pilot area on the media tray
and aren't interfering with the pilot operation. Glass embers must not cover burner ports.
Place the media (Geo Shapes, Rocks and/or
Twigs) around the burner as desired, making sure
not to cover any burner ports. (There are no set
locations).
W415-0745 / B / 06.08.10
WARNING
!
THAT IT IS DRY.
DEALER / DISTRIBUTOR.
PILOT AREA
74.2