Armrest Depth Adjustment; Armrest Height Adjustment - Invacare ProntoTM M6 Owner's Manual

ARMS

ARMREST DEPTH ADJUSTMENT

(FIGURE 3)
1. Loosen bottom adjustment knob.
2. Adjust armrest to desired position.
3. Retighten bottom adjustment knob securely.
NOTE: Perform STEPS 4-5 to adjust BOTH arm-
rests to the same depth.
4. Measure distance from the end of the armrest
pad to the end of the armrest support post.
5. Repeat STEPS 1-4 for opposite armrest setting
armrest at distance determined in STEP 4.
Measure This
Distance
End of Armrest Pad
Armrest
Bottom
Adjustment
Knob
FIGURE 3 - ARMREST DEPTH ADJUSTMENT
End of
Armrest
Support
Post
Armrest
Support
Post

ARMREST HEIGHT ADJUSTMENT

(FIGURE 4)
1. Loosen, but do not remove, the stability set
screws on the armrest post.
2. Remove the mounting screw and locknut that
secure the armrest in place.
3. Adjust armrest to desired mounting position
and secure with existing mounting screw and
locknut. Securely tighten.
4. Retighten the stability set screws on the arm-
rest post.
NOTE: Perform STEPS 5-6 to adjust BOTH arm-
rests to the same height.
5. Count the number of exposed mounting holes
above the armpost.
6. Repeat STEPS 1-4 for opposite armrest setting
armrest at the mounting hole determined in
STEP 5.
Count These
Holes (STEP 5)
Mounting
Screw
Armpost
FIGURE 4 - ARMREST HEIGHT ADJUSTMENT
17
PROCEDURE 4
A
R
M
S
Armrest
Locknut
Stability
Set
Screws