Installing The Brake Shoe Plate - Yamaha YJ50RAP Service Manual

1
2
REAR WHEEL AND BRAKE
3. Measure:
• brake drum inside diameter a
Out of specification → Replace the wheel.
4. Check:
• brake drum inner surface
Oil deposits → Clean.
Remove the oil with a rag soaked in lacquer
thinner or solvent.
Scratches → Repair.
Lightly and evenly polish the scratches with
an emery cloth.
5. Check:
• brake camshaft
Damage/wear → Replace.
EAS00570

INSTALLING THE BRAKE SHOE PLATE

1. Install:
• brake camshaft 1
• spring
• brake shoe wear indicator 2
a. Align the projection a on the brake shoe
wear indicator with the notch in the brake
shoe camshaft.
b. Install the brake camshaft so its punch mark
is positioned as shown.
c. Check that the brake shoes are properly
positioned.
4 - 13
CHAS
Brake drum inside diameter limit
(maximum)
110.5 mm (4.35 in)