Yamaha YJ50RAP Service Manual page 187

Hide thumbs Also See for YJ50RAP:
Table of Contents

Advertisement

EAS00742
4. Ignition spark gap
• Disconnect the spark plug cap from the
spark plug.
• Connect the ignition checker/dynamic
spark tester 1 as shown.
2 Spark plug cap
• Set the main switch to "ON".
• Measure the ignition spark gap a.
• Crank the engine by pushing the starter
switch and gradually increase the spark
gap until a misfire occurs.
Minimum ignition spark gap
6 mm (0.24 in)
• Is there a spark and is the spark gap within
specification?
NO
YES
The ignition system
is OK.
IGNITION SYSTEM
EAS00744
5. Spark plug cap resistance
• Remove the spark plug cap from the spark
plug lead.
• Connect the pocket tester ("Ω × 1k" range)
to the spark plug cap as shown.
• Measure the spark plug cap resistance.
Spark plug cap resistance
5 kΩ at 20°C (68°F)
• Is the spark plug cap OK?
7 - 10
ELEC
Ω×1k
YES
Replace the spark
plug cap.
+
NO

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents