Yamaha YJ50RAP Service Manual page 44

È Fasten the wire harness at the white tape
marker with a plastic locking tie.
É Pass the spark plug lead through the bottom
cowling guide.
Ê Pass the starter motor lead under the engine
bracket and engine mount spacer, and then
through the hole of the cover.
Ë Fasten the wire harness with a plastic locking tie
in front of the storage box bracket.
CABLE ROUTING
Ì Fasten the auto choke lead with a plastic clip.
Í After connecting the AC magneto coupler and
starter motor coupler, cover the couplers with
the coupler cover.
Î Pass the rear brake cable through the bottom
cowling guide.
Ï To rear turn signal.
2 - 22
SPEC