Presetting Stations Automatically; Tuning To Preset Stations; Listening To Radio; Presetting Stations Manually - Alpine CDE-110 Owner's Manual

Radio
SOURCE/
BAND/ /
A.ME

Listening to Radio

1
Press SOURCE/ to select RADIO mode.
2
Press BAND/ / repeatedly until the desired radio
band is displayed.
FM1 FM2 FM3 AM
3
Press or
Press and hold or
station.

Presetting Stations Manually

1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold, for at least 2 seconds, any one of the
preset buttons (1 through 6) into which you wish
to store the station.
The selected station is stored.
The display shows the band, preset number and station
frequency memorized.
A total of 24 stations can be stored in the preset memory (6 stations
for each band; FM1, FM2, FM3 and AM).
If you store a station in a preset memory which already has a station,
the current station will be cleared and replaced with the new station.
Preset buttons
(1 through 6)
FM1
to tune in the desired station.
for at least 0.5 seconds to seek

Presetting Stations Automatically

1
Press BAND/
band is displayed.
2
Press and hold A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND/
is displayed.
2
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
5
/ repeatedly until the desired radio
/ repeatedly until the desired band