Operating Instructions - Vermont Castings WDVST500 Installation & Operating Instructions Manual

WDV See-thru Gas Fireplace
FOr yOur SaFeTy reaD BeFOre lIGhTInG
a. This appliance is equipped with an ignition device which automatically lights the pilot. Refer to the
instructions.
B. BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor
because some gas is heavier than air and will settle on the floor.
WhaT TO DO IF yOu SMell GaS:
• Do not attempt to light any appliance.
• Do not touch any electric switch; do not use any phone in your building.
• Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instruc-
tions.
• If you cannot reach your gas supplier, call the fire department.
c. Use only your finger to push in the master switch. Never use tools. If the switch will not function by
hand, do not try to repair it. Call a qualified service technician. Force or attempted repair may result in
a fire or explosion.
D. Do not use this appliance if any part of it has been under water. Immediately call a qualified service
technician to inspect the appliance and to replace any part of the control system and any gas control
that has been under water.
30
SIGnaTure cOMManD - OperaTInG InSTrucTIOnS
If you do not follow these instruction
exactly, a fire or explosion may result
causing property damage, personal
injury or loss of life.
78D2082