Glass Frame Removal; Light Installation - Vermont Castings WDVST500 Installation & Operating Instructions Manual

WDV See-thru Gas Fireplace

GlaSS FraMe reMOVal

1. Remove the front access door by lifting up and sliding
the two (2) spring hinge pins inward and lifting off.
2. Rotate the three (3) cam levers in the lower access area
90° clockwise.
3. Tilt glass away from unit. Lift glass frame up and away
from unit.
FP2431
FP2431
remove glass 1
Figure 37 -
Remove Glass Frame

lIGhT InSTallaTIOn

1. Remove the front floor screen frame by unfastening
the eight (8) screws securing the front and sides.
2. Install the six (6) halogen light bulbs provided. Do not
touch light bulbs directly with fingers.
3. Replace the front floor screen frame. Be sure wires do
not get pinched below the light channel.
4. Repeat procedure for lights on opposite side.
28
Front Access
Door
Spring Hinge
Pin
Pilot is Positioned in Center
Figure 38 -
Install Light Bulbs
GlaSS reMOVal & lIGhT placeMenT
Cam Levers
FP2432
open cam levers
Floor Screen
Frame
FP2433
lift glass
Halogen Light
Bulbs
FP2434
replace light bulbs
FP2432
FP2433
Screws
FP2435
78D2082