Glass Frame Removal; Light Installation - Vermont Castings WDV500NTSC Installation And Operating Instructions Manual

Direct vent gas fireplace
Table of Contents

Advertisement

WDV Series Gas Fireplace

Glass FraMe reMOVal

1. Remove the front access door by lifting up and sliding
the two (2) spring hinge pins inward and lifting off.
2. Rotate the three (3) cam levers in the lower access area
90° clockwise.
3. Tilt glass away from unit. Lift glass frame up and away
from unit.
FP2431
Figure 37 -
Remove Glass Frame
FP2431
remove glass 1

lIGht InstallatIOn

1. Remove the front floor screen frame by unfastening
the four (4) screws securing the front and sides.
2. Install the six (6) halogen light bulbs provided. Do not
touch light bulbs directly with fingers.
3. Replace the front floor screen frame. Be sure wires do
not get pinched below the light channel.
28
Front Access
Door
Spring Hinge
Pin
Figure 38 -
Install Light Bulbs
Glass reMOVal & lIGht placeMent
Cam Levers
FP2432
open cam levers
Floor Screen
Frame
FP2433
lift glass
Halogen Light
Bulbs
FP2434
replace light bulbs
FP2432
FP2433
Screws
FP2435
78D0011

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wdv500ptscWdv600ptscWdv600ntsc

Table of Contents