Multi Preview Output - Datavideo SE-2000 Instruction Manual

Multi Preview Output

The Multi Preview output on the rear of the SE-2000 should be connected to a compatible 19" to 24" LCD monitor
via a DVI-D cable connection. This Multi Preview display output can be run at 1080i or 720p [60Hz].
The Multi Preview display confirms at a glance the values for Clock, Transition, User Profile, Input 4 and HD
Mode as well as indicating which sources are selected for PiP, PREVIEW and PROGRAM.
The 8 downscaled image windows of the Multi Preview Display are not full HD resolution and should only be used
for choosing the next source to be selected for either PiP, Preview or Program.
In the diagram above Input source 3, labelled as 'IN 3 CAMERA 3', has a red indicator on the right hand side
showing this source is also the current PROGRAM or Main Source.
In the diagram above Input source 1, labelled as 'IN 1 CAMERA 1', has a Yellow indicator on the left hand side
showing this source is also the current PREVIEW or Sub Source.
When the T-Bar; TAKE or CUT buttons are used the indicator will change to Red on the right hand side of 'IN 1
CAMERA 1' showing that input source 1 is now being sent to the PROGRAM output instead of Input 3.
12