Specific Safety Rules; Functional Description; Specifications - Milwaukee 2410-059 Operator's Manual

• U se power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
• W hen battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
• U nder abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
sERVICE
• H ave your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

sPECIfIC sAfETy RulEs

• W ear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
• U se auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
• H old power tools by insulated gripping sur-
faces when performing an operation where
the cutting accessory may contact hidden
wiring. Cutting accessory contacting a "live" wire
may make exposed metal parts of the power tool
"live" wire and could give the operator an electric
shock.
• M aintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a Milwaukee service facility for a free
replacement.
• W ARNING Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
Volts No Load
Cat. No. DC RPM
2410-059 12 Low 0-400
High 0-1500
2411-059 12 Low 0-400
High 0-1500

sPECIfICATIoNs

No Load
Blows per
Minute Steel Flat Bit Auger Bit Hole Saw Screws (dia.)
n/a 3/8"
Low 6000 3/8"
High 22,500
symbology

fuNCTIoNAl DEsCRIPTIoN

2
1
8
7
1. Keyless chuck
2. Clutch adjusting ring
3. Application selector ring
(Cat.No. 2411-059 only)
4. Speed selector
5. Fuel Gauge
6. Control Switch
7. Trigger
8. LED
Capacities
Wood
7/8" 7/8"
7/8" 7/8"
15
Volts
Direct Current
No Load Revolutions per Minute
(RPM)
Seal of Electrical Security
Read operator's manual
Wear hearing protection
Wear eye protection
4
3
1-1/8" 1/4"
1-1/8" 1/4"
5
6
Masonry
n/a
3/8"