Table of Contents
Advertisement
• U se power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
• W hen battery pack is not in use, keep it away
from other metal objects like paper clips,
coins, keys, nails, screws, or other small metal
objects that can make a connection from one
terminal to another. Shorting the battery terminals
together may cause burns or a fire.
• U nder abusive conditions, liquid may be eject-
ed from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
service
• H ave your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
specific safeTy rules
•
Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal injury.
•
Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
• M aintain labels and nameplates. These carry
important information. If unreadable or missing, contact
the store where the product was originally purchased or
one of our authorised MILWAUKEE ® service centres.
• W ARNING Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and
other masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are spe-
cially designed to filter out microscopic particles.
Volts
Cat. No.
DC
M18 CRAD
18
SPECIFICATIONS
Steel
No Load
RPM
Twist Bit
0 - 1200
8 mm (5/16")
symbology
Volts
Direct Current
No Load Revolutions
per Minute (RPM)
funcTional descripTion
1
2
1. Top handle
2. 13 mm (1/2") Keyed chuck
3. LED
4. Chuck key storage
5. Main handle
6. Trigger
7. Control switch
Capacities
Ship Auger Bit
32 mm (1-1/4")
3
7
6
3
Wood
Selfeed Bit
Hole Saw
50 mm (2")
102mm (4")
5
4
Advertisement
Table of Contents
