Protect Your Ears; Care And Handling - Blueant S1 User Manual

Protect Your Ears

All BlueAnt devices are designed to reach volumes of up 100 decibels.
Prolonged use of a BlueAnt device at high volumes may affect your hearing capacity.
Using for extensive time periods may result in noise induced hearing loss (NIHL).
Do not listen at high volume levels. Remember that your ears will adapt to the volume
level set and if you change to higher levels your ear may feel no discomfort but
damage to your hearing may be occurring.
BlueAnt recommends that you:
• Set the volume control in a low position before using your BlueAnt device.
• Limit the amount of time you use your BlueAnt device at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can't hear people speaking near you.

Care and Handling

Your BlueAnt Bluetooth device is a precision engineered instrument. To ensure its ongoing
performance, your Bluetooth device should be looked after as you would any quality consumer
electronic product.
BlueAnt recommends that you take the following precautions.
• Avoid leaving your device in direct sunlight, such as on the dash or console of a car or truck.
Always place it in your car glove box, your pocket, or take it with you.
• Do not leave your device, or use your device, in any area where the temperature may exceed
60 degrees Centigrade (140 degrees Fahrenheit), such as inside a closed car on a hot day.
Remember that on a hot day the temperature inside a closed car may be significantly higher
than the outside air temperature.
• Do not leave your device, or use your device, in any area where the temperature is likely to drop
below 0 degrees Centigrade (32 degrees Fahrenheit).
• Do not use any household or industrial grade detergents or cleaners to clean your device. If your
device becomes dirty or smeared, in most instances a wipe with a dry or slightly damp cloth
should be sufficient to clean it.
28