Pairing - Blueant S1 User Manual

Pairing

You only need to pair your phone with the S1 once. Once you have paired your phone with the S1 they
will reconnect to each other in future without you having to repeat the pairing process. If you need to
pair an additional phone, simply:
1. Turn the S1 off by holding down
S1 will beep and the light will turn red and then go out.
2. Put the S1 back into pairing mode by holding down
about 5 seconds, until the Bluetooth light starts flashing red and blue.
3. Follow the instructions in
phone.
The S1 can store pairing information for up to 8 Bluetooth devices. If you pair a ninth device, it will
replace the stored pairing information for the phone that has not connected to the S1 for the longest
time.
You can connect the S1 to two phones at the same time. For more information, see
One Phone At The Same Time (Multipoint)" (page
(the Multi-Function button) for about 5 seconds. The
"Getting Started: Pairing The S1" (page 6)
17).
(the Multi-Function button) for
to pair the S1 with your
"Using More Than
13