Blueant Supertooth Frequently Asked Questions Click on the relevant question: Am I using the correct pairing Mode according to my phone? Why won’t my Supertooth won’t go into Pairing mode? Is my Supertooth Charged? Why will my Supertooth not connect when turned on or comes into range(10m) ? Why can’t I hear any sound from the Speaker?
Page 2
6 volts Wall Adapter and Cigarette Socket adapter must plug into the Fast Charge Plug on the Supertooth. 12 volts plug on the Supertooth can use a 12v DC power adapter (not included in package). Supertooth may need to be paired again if the battery has been fully discharged. www.blueant.com.au...
Page 3
OFF the visibility option in the Bluetooth Menu of your phone so that other Bluetooth users cannot see the contents of your phone. (This only applies to a few mainly older Bluetooth enabled phones as most new phones have better security) www.blueant.com.au...
Page 4
Try using the Cigarette Socket Charger to charge the device. If this works, it may mean that you have a faulty Wall Charger. (Please contact us directly for a new replacement Wall Charger to be sent out to you). If it does not work, see the above question about ‘power on’. www.blueant.com.au...