Troubleshooting ......................18 Resetting the S1 ....................18 To Reset the S1.................... 18 My Phone Does Not Automatically Reconnect to the S1 ........18 Configuring Your Phone To Automatically Reconnect to the S1....19 S1 Reference ......................20 Understanding the Light Flashes ............... 20...
Welcome to the S1 user manual. If you are looking for help with your BlueAnt S1, then you've come to the right place. This manual explains everything you need to know about your S1, and more.
Page 4
Please consider the environment before printing the user manual.
1. Make sure the S1 is turned off. You can tell if the S1 is on or off by looking at the Bluetooth Light on the front. If the light is on or flashing, then the S1 is on: turn it off by holding down (the Multi-Function button) for about 5 seconds.
Page 6
If your phone does not connect to the S1, then use your phone's Bluetooth menu to initiate a connection to the S1. If you don't know how to do this, refer to the section on pairing in your phone's manual.
The S1 is designed to attach to your car's sun visor. Use the supplied plastic clip to attach the S1 to the visor. 1. Attach the clip to the slots on the back of the S1 and slide it so that it locks in place. Do not force on the S1's buttons when you attach the clip.
Activating the Voice Answer Feature You can only turn the voice answer feature on or off when the S1 is in "Standby" mode (the S1 is turned on but there is no active call or music streaming).
BlueAnt S1. Streaming Music If your phone supports the Bluetooth A2DP profile, you can play music from it through the S1 speaker. To play music, make sure that your phone is paired and connected, then simply go to your phone's music player and press play.
On some phones you will need to restart the music manually. Switching the S1 On and Off You can tell if the S1 is on or off by looking at the Bluetooth Light on the front. If the light is on or flashing, then the S1 is on.
Pairing You only need to pair your phone with the S1 once. Once you have paired your phone with the S1 they will reconnect to each other in future without you having to repeat the pairing process. If you need to pair an additional phone, simply: 1.
Charging the S1 Your S1 has been given an initial charge to get going, but in future you will need to charge it for up to 3 hours. Use the supplied AC adapter to charge the S1 whenever the battery is low.
If this applies to your phone, you can avoid this by configuring the phone to treat the BlueAnt S1 as a "trusted connection". See "My Phone Does Not Automatically Reconnect to the S1" (page 18) for more information.
The BlueAnt S1 is designed to reconnect to your phone automatically. If you take your phone out of range of the BlueAnt S1 for more than 20 seconds (without turning the S1 off), and then come back into range the S1 will search for your phone and reconnect automatically.
In this case you will not be able to tell which phone is the primary until you either initiate a call through the S1 or receive a call on one...
Page 16
Setting the Primary Phone You can force the S1 to change the primary phone by doing any of the following: • Answer an incoming call. The phone receiving the call will become the primary phone. • Initiate a call from one of the phone handsets. The phone making the call will become the primary phone.
Multiple Calls The S1 does not allow you to hear a call or music from 2 phones simultaneously. If you receive a call while you are already on an ongoing call, you will hear a special ringtone. • Click to end the current call and accept the incoming call.
3. The S1 will turn on. Hold down the "MFB" for about 5 seconds to turn it off again. The S1 has now been reset: all pairing information has been deleted. When you turn the S1 back on...
S1. If your phone keeps prompting you about the connection to the S1, then you should change the setting on your phone so that it treats the S1 as a trusted or authorized connection.
S1 Reference This section contains detailed reference information about the S1. Understanding the Light Flashes The Bluetooth Light on the middle of the S1 changes indicates the current state of the S1. Light Description Flashing Blue Indicates that the S1 is on.
5 seconds the S1 is switching off. (until the Bluetooth Light turns red). Enter Pairing Mode You must switch the S1 off first With the S1 off, hold before you can enter pairing mode. about 5 seconds (until the Bluetooth Light starts flashing red and blue).
Page 22
Hold "Vol +" for 5 seconds (until the You can only turn the voice answer Answer Feature S1 beeps). feature on or off when the S1 is in "Standby" mode (the S1 is turned on but there is no active call or music streaming). For more information about answering calls with your "Answering Calls"...