Epson Aculaser C2000 Setup Manual page 30

c
Caution:
Before you install a memory module, be sure to discharge any
static electricity by touching a grounded piece of metal.
Otherwise, you may damage static-sensitive components.
w
Warning:
Be careful when working inside the printer as some components
are sharp and may cause injury.
1. Make sure the printer is turned off and unplug the power
cord.
2. Remove the cover from the back of the printer.
3. Hold the memory module above the DIMM slot and insert it
into the S1 slot. Do not apply too much force.
29
Installing the Options
S1 slot