Connecting To The Computer - Epson Aculaser C2000 Setup Manual

Connecting to the Computer

To connect your computer to the printer's built-in parallel
interface, you need a shielded, twisted-pair parallel interface
cable that is IEEE-1284 compatible.
Note:
If you want to connect the printer to your computer through an installed
optional interface card, you need a different type of cable. See the optional
interface card's manual.
1. Make sure that both the printer and the computer are turned
off.
2. Attach the parallel interface cable to the printer as shown.
3. Plug the other end of the cable into the computer's parallel
interface connector.
Testing and Connecting the Printer
38