ASROCK Fatal1ty Z97 Killer Series Manual page 30

E D
E D
C B
E D
26
C B A
A
C B
A
C B A
Step 3
Move the standof based on the
module type and length.
he standof is placed at the nut
location D by default. Skip Step 3
and 4 and go straight to Step 5 if you
are going to use the default nut.
Otherwise, release the standof by
hand.
Step 4
Peel of the yellow protective ilm on
the nut to be used. Hand tighten the
standof into the desired nut location
on the motherboard.
Step 5
Align and gently insert the M.2
(NGFF) SSD module into the M.2
slot. Please be aware that the M.2
(NGFF) SSD module only its in one
orientation.