ASROCK Fatal1ty Z97 Killer Series Manual page 25

Power LED Header
(3-pin PLED1)
(see p.1, No. 17)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 14)
SATA3_0
(SATA3_1:
see p.1, No. 9)
(SATA3_2:
SATA3_3
see p.1, No. 10)
(SATA3_3:
see p.1, No. 13)
(SATAE_4:
see p.1, No. 11)
(SATAE_5:
see p.1, No. 11)
Serial ATA Express
Connector
(SATAE:
see p.1, No. 11)
USB 2.0 Headers
(9-pin USB4_5)
(see p.1, No. 15)
(9-pin USB6_7)
(see p.1, No. 16)
1
PLED-
PLED+
PLED+
SATA3_1 SATA3_2
SATAE_5 SATAE_4
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Fatal1ty Z97 Killer Series
Please connect the chassis
power LED to this header
to indicate the system's
power status.
hese six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
he SATAE_4, SATAE_5
are shared with the SATA
Express connector.
Please connect either
SATA or PCIe storage
devices to this connector.
he SATA Express
connector is shared with
the SATAE_4, SATAE_5
and the M.2_SSD (NGFF)
Socket 3.
*he SATA Express
interface is a combination
of SATAE, SATAE_4, and
SATAE_5.
Besides four USB 2.0 ports
on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.
21