Erasing; Erasing Tracks; Erasing A Whole Disc; Refreshing A Disc - Tascam CD-RW900mkII Owner's Manual

Erasing

Erasing tracks

This operation erases the specified track and all sub-sequent tracks
from a recorded CD-RW disc.
NOTE
Once this operation has started, the STOP key cannot
be used to cancel it. Please check the track range to be
deleted first.
Erasing track is operated only when unit is in continu-
os playback.
1. While stopped, press the
ERASE
the front panel or the
control. Select the
ERASE TRACK?
the MULTI JOG dial or pressing the
remote control.
To cancel the operation at this point, press the
ERASE/DEL ERASE
or the
2. Push the MULTI JOG dial or press the
to enter the function.
The display shows
E r a s e X X - X X

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a disc),
follow the procedure below:
NOTE
Once the operation is proceeded, the STOP key
cannot function. Please confirm before the operation.
1. While stopped, press the
ERASE
front panel or the
Select the
E R A S E D I S C ?
JOG
dial or pressing the
control.
To cancel the operation at this point, press the
ERASE/DEL or the ERASE

Refreshing a disc

Refreshing the disc makes a disc usable again. This operation
destroys all data on the disc.
1. Load the disc, and the unit in stop mode, press the
ERASE/DEL key on the front panel or the
key on the remote control. Select the
MULTI JOG
rotating the
key on the remote control.
To cancel the operation at this point, press the
ERASE/DEL ERASE
or the
MULTI JOG
2. Push the dial or press the
on the remote control to enter the function. The
display shows
S u r e ?
ERASE/DEL
key on
key on the remote
rotating
SKIP key on the
key again.
ENTER key
(the number of
ERASE/DEL
key on the
key on the remote control.
MULTI
by rotating the
SKIP
key on the remote
key again.
ERASE
R E F R E S H ?
SKIP
dial or pressing the
key again.
ENTER
key
6 − After recording
the first track and last track to be erased).
Rotate the MULTI JOG
change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL ERASE
or the
3. Push the MULTI JOG dial or press the
operate the function.
The display shows
S u r e ?
To cancel the operation at this point, press the
STOP key.
MULTI JOG
4. Push the dial or press the
again to proceed the operation.
The display shows
Erase
time. The unit starts counting down from a time
shown on the display.
5. When the tracks have been erased,
appears on the display.
MULTI JOG
2. Push the dial or press the
to enter the function. The display shows
To cancel the operation at this point, press the
STOP
key.
MULTI JOG
3. Push the dial or press the
again to proceed the operation.
The display shows
Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been erased,
then will appear on the display.
B l a n k D i s c
To cancel the operation at this point, press the
STOP key.
MULTI JOG
3. Push the dial or press the
again to proceed the operation.
The display shows
Erase
time. The unit starts counting down from a time
shown on the display.
4. When the disc has been refreshed,
then will appear on the display.
Blank Disc
TASCAM CD-RW900MKII
dial or press the SKIP key to
key again.
ENTER key to
ENTER
key
flashing and the remaining
will
C o m p l e t e
ENTER
key
S u r e ?
ENTER
key
flashing and the remaining
appears
C o m p l e t e
ENTER
key
flashing and the remaining
appears
Complete
29