Speaker Assembly, Versaglide Assembly, Lcd Panel Latch Switch Assembly; Versaglide Assembly; Lcd Panel Switch Board - NEC VERSA LX Service And Reference Manual

Speaker Assembly, VersaGlide Assembly, LCD Panel Latch Switch Assembly

1. Position the front cover assembly as shown in the following illustration.
2. Remove the speaker assembly by removing 6 screws. Lift the speaker
assembly from the front cover assembly.

VersaGlide Assembly

Remove the VersaGlide and cable assembly instructions as follows.
1. Disconnect the LCD panel switch cable from connector CP16 (
VersaGlide assembly.
2. Remove the four screws (
3. Lift the VersaGlide assembly from the front cover assembly.
A – Connector CP16

LCD Panel Switch Board

Remove the LCD panel switch boards instructions as follows.
1. Disconnect the LCD panel switch cable from connector CP17 (
LCD panel latch switch board.
A – Screws
B ).
B – Speaker Assembly Screws
Disassembly and Reassembly 3-23
) on the
A
) on the
B