Erasing Voice Memos; Setting Up Screen Call - Sanyo SCP-810 User Manual

Erasing Voice Memos

1. Press
to access the main menu.
2. Highlight Voice Service and press
3. Highlight Voice Memo and press
4. Highlight Play and press
5. Display the memo list, highlight All and press
softkey).
6. Highlight Erase All and press
7. Highlight Yes and press
– or –
1. Press
to access the main menu.
2. Highlight Voice Service and press
3. Highlight Voice Memo and press
4. Highlight Erase All and press
5. Highlight Yes and press
Note: To erase individual memos, see "Reviewing Voice Memos" on the
previous page.
86
.
.
.
(right
Options
.
.
.
.
.
.

Setting Up Screen Call

This feature enables you to answer incoming calls by using pre-
recorded announcements, either one that is pre-recorded or one
that you record. You can also record the caller's message into the
Voice Memo list. To listen to the message, see "Reviewing Voice
Memos "on page 85.
Activating Screen Call
To start Screen Call when you have incoming calls:
1. Press
to display the options.
2. Highlight Screen Call and press
To set Auto Screen Call:
1. Press
to access the main menu.
2. Highlight Voice Service and press
3. Highlight Screen Call and press
4. Highlight Auto and press
5. Highlight On and press
If you want to change the answer time, enter your desired
number (from 1 to 16 seconds) by using numeric keys or the
up/down Navigation key.
6. Press or (left softkey). The
OK
Standby display.
Tip:
If a new caller's message is waiting,
memos recorded while activating "Screen Call" are shown with "
√
!
" " icon in the list. (" ": once played, "
Tip:
While the caller is recording: Pressing
disconnects the call. Pressing
.
.
.
.
.
icon is displayed on the
appears on the display. The
√
" or
!
": not played yet)
stops recording and
answers the call.
87