Erasing Voice Memos; Activating Screen Call - Sanyo SCP-3200 Operating Manual

Erasing Voice Memos

To erase an individual memo:
1. Press MENU/OK to access the main menu.
2. Select Tools and press MENU/OK.
3. Select Voice Services and press MENU/OK.
4. Select Voice Recorder and press MENU/OK.
5. Select Play or Play:Speaker and press MENU/OK.
6. Select Voice Data and press MENU/OK.
7. Select the memo you want to erase and press MENU/OK.
8. Press Options (right softkey) and select Erase.
9. Select Yes and press MENU/OK.
To erase all Voice Memos:
1. Follow steps 1-4 above.
2. Select Erase All and press MENU/OK.
3. Select Voice Data and press MENU/OK.
4. Select Yes and press MENU/OK.
Setting Up Screen Call
This feature enables you to screen incoming calls by using recorded announcements either one
that is pre-recorded or one that you record. You can also record the caller's message into the
Call Memo list. To listen to the message, see "Reviewing Call Memos" on the previous page.

Activating Screen Call

To start Screen Call when you have incoming calls:
1. Press Options (right softkey) to display the options.
2. Select Screen Call and press MENU/OK.
To set Auto Screen Call:
1. Press MENU/OK to access the main menu.
2. Select Tools and press MENU/OK.
3. Select Voice Services and press MENU/OK.
4. Select Screen Call and press MENU/OK.
5. Select Auto and press MENU/OK.
6. Select On and press MENU/OK.
7. Set the answering time by using numeric keys or the navigation key up or down.
8. Press MENU/OK or OK (left softkey).
49