Erasing Voice Memos; Setting Up Screen Call; Activating Screen Call - Sanyo SCP-8200 Operating Manual

Erasing Voice Erasing Voice Memos Memos
Erasing Erasing Voice Voice Memos Memos
To erase individual memos:
1. Press MENU/OK to access the main menu.
2. Select Voice Services Voice Services and press MENU/OK.
Voice Services Voice Services
3. Select Voice Memo Voice Memo Voice Memo Voice Memo and press MENU/OK.
4. Select Play Play or Play:Speaker Play Play Play:Speaker and press MENU/OK. Play:Speaker Play:Speaker
5. Display the memo list, highlight the memo you want to erase, and press
Options (right softkey). Options
Options Options
6. Select Erase Erase Erase Erase and press MENU/OK.
7. Select Yes Yes Yes Yes and press MENU/OK.
To erase all voice memos:
1. Follow steps 1-5 above.
2. Select Erase All Erase All and press MENU/OK. Erase All Erase All
3. Select Yes Yes and press MENU/OK. Yes Yes
- or -
1. Press MENU/OK to access the main menu.
2. Select Voice Services Voice Services Voice Services and press MENU/OK. Voice Services
3. Select Voice Memo Voice Memo and press MENU/OK. Voice Memo Voice Memo
4. Select Erase All Erase All and press MENU/OK.
Erase All Erase All
5. Select Yes Yes and press MENU/OK.
Yes Yes

Setting Up Screen Call

Setting Up Screen Call Setting Up Screen Call Setting Up Screen Call
This feature enables you to screen incoming calls by using recorded announcements either one
that is pre-recorded or one that you record. You can also record the caller's message into the
Voice Memo list. To listen to the message, see "Reviewing Voice Memo" on page 57.
Activa

Activating Screen Call

Activa Activa ting Screen Call ting Screen Call ting Screen Call
To start Screen Call when you have incoming calls:
1. Press MENU/OK to display the options.
2. Select Screen Call Screen Call Screen Call Screen Call and press MENU/OK.
To set Auto Screen Call:
1. Press MENU/OK to access the main menu.
2. Select Voice Services Voice Services and press MENU/OK. Voice Services Voice Services
3. Select Screen Call Screen Call Screen Call and press MENU/OK. Screen Call
4. Select Auto Auto and press MENU/OK.
Auto Auto
5. Select On On and press MENU/OK.
On On
6. Set the answering time by using numeric keys or ▲/▼ on the Navigation key.
7. Press MENU/OK or OK OK (left softkey) .
OK OK
59