Displaying Your Phone Number; Making And Answering Calls; Making Calls; Answering Calls - Sanyo SCP-810 User Manual

Displaying Your Phone Number

1. Press
to access the main menu.
2. Highlight Phone Info and press
3. Highlight Phone# and press
Note: To access the phone's main menu, press
mode. Menu items may be selected by highlighting them with the
Navigation key and pressing
corresponding to the menu item on your keypad.

Making and Answering Calls

Making Calls

1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialling,
press to erase one digit at a time. Press and hold
erase the entire number.)
3. Press
.
4. When you're finished, press
Tip:
To redial your last outgoing call, press
Important: When you use your phone to maximize performance, extend
the antenna and do not touch the antenna.
Correct
8
.
.
from standby
, or you can press the number
.
twice.
Incorrect

Answering Calls

1. Make sure your phone is on. If your phone is off, incoming
calls go to voicemail.
2. When a call comes in, answer the call by pressing
Depending on your settings, your phone notifies you of
incoming calls in the following ways:
The phone rings or vibrates.
The LED flashes.
The backlight illuminates.
The screen displays an incoming call message.
If available, the phone number of the caller is displayed.
If the phone number is in your Internal Phone Book, the
Phone Book entry's name is displayed.
The following options are also displayed by pressing
To select an option, highlight it and press
to
Answer to answer the call.
Don't Answer to hang up the incoming call and return to Web
while you are in the Web operation. (This feature appears
when Web access is dormant.)
Screen Call to answer the call by using pre-recorded
announcement. See page 87 for setting up.
Quiet Ringer to mute the ringer. (This feature appears when
the ringer is set.)
Note: If your phone is off, incoming calls go to voicemail.
3. To disconnect the call, press
.
.
.
.
9