Camera Positioning Device Configuration - Vivotek IP3111 User Manual

Camera positioning device configuration

Since Network Camera can be used in either PPP network or Ethernet network, the single
serial port can control either external serial port devices like camera positioning devices or
a data modem. While in PPP interface, go to Modem page for modem configuration. Options
on this page will be ignored.
To control the external PT positioning device, "Enable camera control" must be checked
and the control panel or buttons will thus display on the main page. Network Camera
supports RS232 and RS485 interface to control external serial port devices. Refer to the
hardware description to connect an RS485 device. The "Port Settings" and "Control
Settings" must be configured according to the instruction manual of the external serial
53
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532