Vivotek IP3111 User Manual page 30

procedures below for basic configurations. If people other than the administrator will be
allowed to use Network Camera, the administrator should add these user profiles in the
Security option. When Network Camera accepts dial-in connection and acts as a server, the
user name and password used in dialing are the same as what was stored in the user
database managed for web access. Any managed user can be authorized during PPP
negotiation and access web pages. However only administrators can access the
configuration page.
There is more information needed for correct modem operation. Refer to the modem
setting section in configuration for further settings. Network Camera will wait for someone
to dial in. If the administrator has setup some conditions in the application, Network
Camera will automatically dial out based on the administrator's configuration. Refer to the
application section in configuration for special security applications. After everything is set
and saved, turn off Network Camera and replace the null modem cable with modem for
dial-up network. Since the null modem connection is used to configure Network Camera in
advance for modem connection, administrators cannot connect again without restarting
the system.
If dial-out configuration is activated, Network Camera will dial out to send a system startup
log to test and drop the call after the pre-configured period.
29
www.vivotek.com
T: 886-2-82455282
F: 886-2-82455532