Turning A Powerpoint File Into A Scenario - Epson EB-1735W Operation Manual

Turning a PowerPoint File into a Scenario

PowerPoint files can be converted to scenarios by the following three
methods. When you want to use a PowerPoint file as is, use either
method 1 or 2.
1 Batch conversion without starting EMP Slidemaker2
All of the slides in a PowerPoint presentation can be batch-converted into
a scenario. s "Converting all files in a single operation without starting
up SlideMaker2" p.69
2 Include a PowerPoint file from the file list
After the PowerPoint files have been batch converted to create scenarios,
an image or movie file can then be converted to create another scenario.
s "Starting up SlideMaker2 and Converting Files"
3 Include only the slides you want from the thumbnails
Select only the PowerPoint slides you need and then convert them to a
scenario. s p.71
• When creating scenarios with methods 1 to 2, the
q
following animations
set in PowerPoint are also reflected in the scenario.
• Fly
• Checkerboard
• Peek
• Split
• Swivel
• Animations other than those mentioned above are
replaced by the animations in "Animation Rules (Default:
Cut)". s p.82
• The picture quality for scenarios created with method 1 is
"Normal" from a possible, "Highest Quality",
"High Quality", and "Normal". When you want to create
a scenario with a high image quality, use methods 2 to 3.
p.71
• Blinds • Box
• Crawl • Dissolve
• Random Bars • Spiral
• Stretch • Strips
• Wipe • Zoom
The following table shows the differences when using methods 1 to 3.
Image Quality
1 "Normal" fixed
2 Select from "Highest
Quality", "High Quality" and
"Normal"
3 Select from "Highest
Quality", "High Quality" and
"Normal"
*1 When scenario creation is complete, the "Send Scenario" screen is
automatically displayed.
*2 After creating the scenario, perform "Sending Scenarios" s p.79.
Animation
Send Scenario
Reflection
Reflected Continuous
*1
operation
Reflected Continuous
*1
operation
Not reflected Operating later
68
*2