Converting Directly From A Powerpoint File To A Scenario - Epson EB-1925W Operation Manual

Converting PowerPoint Files to Scenarios
J
Remove the USB storage device from the computer.
See the computer's user's guide for the removal method.
K
After finishing transferring your scenario, connect the USB
storage device to the projector and start projection using PC
Free. p.56
s
When the resolution of the projector that is projecting the scenario
q
is XGA type, scenarios for which WXGA (1280 x 800 dots) is set
cannot be played back. Project after converting the PowerPoint file
to an XGA (1024 x 768 dots) scenario file.
Converting Directly from a PowerPoint File to a
Scenario
This section explains how to convert directly from a PowerPoint file to
a scenario.
This is useful when you want to convert without modifying any
q
settings. Because the settings from the Set screen are reflected
during conversion, check the settings before hand when After
converting a file, copy it to memory is not selected.
Procedure
A
Drag & drop the PowerPoint file icon to the EasyMP Slide
Converter program icon on the desktop. Or, right click the
PowerPoint file and select " Convert to FSE".
Note that, in this case, it is not possible to select multiple
PowerPoint files and convert them. Select only one file for
conversion.
EasyMP Slide Converter starts.
B
When "After converting a file, copy it to memory." is
selected on the Set screen, the Set screen is displayed. Go
to procedure 4 "Converting to a
s
When "After converting a file, copy it to memory." is not
selected, click "Convert" on the confirmation screen to
convert the file.
Converting the file to a scenario starts. When Play a slideshow
and convert files is selected from Conversion Mode, the
Slideshow is displayed.
C
When "After converting a file, copy it to memory." is not
selected, the main screen is displayed when conversion is
complete.
When "After converting a file, copy it to memory." is
selected, go to procedure 6
Scenario".
"Converting to a Scenario".
s
72