Projecting Scenarios
Projecting Scenarios
This section describes the method for playing scenarios stored in a USB
storage device, and the operations during scenario playback.
Although the following steps are explained based on the Remote Control,
you can perform the same operations form the projector's Control panel.
Creating and Editing a Scenario
Create the scenario beforehand by using EasyMP Slide Converter, and
then transfer it to the USB storage device.s
Basic SIT file editing
For SIT files converted via EasyMP Slide Converter basic conversion , it
is possible to change the order in which images are projected, and set
whether or not to display individual images.
q
Basic editing cannot be performed for FSE files.
Procedure
A
Press the [
][
cursor over the SIT file you want to edit and press the Esc
button.
p.69
][ ][ ] buttons to position the
B
Select " Edit Scenario" from the menu displayed, then press
the Enter button.
63