Mailbox; Other Configurations; Receiving Calls - Siemens euroset 3020 User Manual

: Enter the operator code (1 to 6 digits)
Press the MENU key
Note:
The operator code is valid just for the
countries where this service is available.

Mailbox

To program the number of your mailbox by
( )
using the MAILBOX * key (position 14 on
page 3), proceed in the following way:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the MAILBOX option by using
the DIAL/SELECT key
Enter access number of your mailbox
:
(max of 16 digits)
Press the MENU key
( )
* in case of having contracted the Mailbox service
of your local operator

Other configurations

There are other configurations that can be
accessed by using the PREFERENCES
option, as is shown by the following:
Press the MENU key
Select the CONFIGURATION option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Select the PREFERENCES option by
using the DIAL/SELECT key
Enter one of the codes below, in
according with the desired option:
• 11 flash time 250 ms
• 12 flash time 375 ms
• 13 flash time 600 ms
• 14 flash time 100 ms
• 21 pause time 2 s
• 22 pause time 3 s
• 23 pause time 3,6 s
• 24 pause time 1 s
:
• 31 enables checking repeated
calls
• 32 disables checking repeated
calls
• 51 erase the list of outgoing calls
• 52 erase the list of received calls
• 99 returns to default
configuration
Press the MENU key

Receiving calls

When receiving a call, the telephone will
give a resonant warning in accordance with
the melody and the volume selected. To
answer the call, lift the handset. In case of
having contracted the Service of Call
Identification of your local operator, the
display will show information about the
number that originated the call (see the
item about Call Identification on page 11).
Note:
To receive call identification information, do
not answer the telephone before the
second ring.
8