Erasing The Received Calls; Consultation Of Outgoing Calls; Erasing The Outgoing Calls; Password - Siemens euroset 3020 User Manual

4) Duration of call in minutes (00' if it was
not answered and 99' if it exceeds the
two digit counter)
5) Caller number
6) Caller name
If the list of received calls is empty, on
making the consultation the display will
show the message "NO CALL".
In the list of new calls (unanswered calls
still not reviewed), you can enable or
disable the telephone to check repeated
calls (see the item Other configurations
on page 8). When the repeated call
indicator REP is enabled and there are
repeated calls without verification (they are
listed as NEW), the telephone will store
only the last call of each repeated number.
When the check of repeated calls is
disabled, all the calls will be stored in the
list of received calls, even if it is repeated.

Erasing the received calls

To erase a call from the list of received
calls, proceed in the following way:
Select the register that will be erased
by using the ARROW key
Press the DEL/EXIT key
Press the key to confirm
To erase all the list of received calls,
proceed in accordance with the item Other
configurations on page 8, code number
52 in the PREFERENCE option.

Consultation of outgoing calls

To consult the list of outgoing calls,
proceed in the following way:
Press the MENU key
Select the OUTGOING CALLS option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
Scroll the list by using the ARROW
key

Erasing the outgoing calls

To erase a call from the list of outgoing
calls, proceed in the following way:
Press the MENU key
Select the OUTGOING CALLS option
by using the DIAL/SELECT key
Select the Y option by using the
ARROW key
Press the DIAL/SELECT key
Select the register that will be erased
by using the ARROW key
Press the DEL/EXIT key
Press the key to confirm
To erase all the list of outgoing calls,
proceed in accordance with the item Other
configurations on page 8, code number
51 in the PREFERENCE option.

Password

The key lock function is protected by a 4
digit password. The default password is
1234, and it can be modified. When the
password is entered, the characters " - "
(hyphens) replace the password digits as
they are keyed in. The ARROW
erases the last digit.
12
or