Quick Reference Guide - Inter-Tel INT1100 User Manual

Step 1 Charging the Battery
INSTALL THE HANDSET BATTERY
Remove the cover.
Connect the battery
pack connector with
the correct polarity.
Replace the cover.
PLUG INTO AC POWER
Plug the AC adapter cord into the base unit and
then to a 120V AC outlet.
Place the handset in the base.
Note: You must charge the battery pack continuously
for 15-20 hours before using the phone.
[ 4 ] Q U I C K R E F E R E N C E G U I D E
Step 2 Connecting
CONNECT TO A PHONE LINE
When the handset battery pack is fully charged, plug
the telephone cord into the base unit and then into a
telephone wall jack.
Your phone is set for tone dialing. If your local network
requires pulse dialing, please see "Setting up the phone,
Choose the dialing mode" in your owner's manual.
Step 3 Setting up the Caller
ID Options/Language
Note: Three Caller ID options are
available: Auto Talk, Caller ID on Call
Waiting (CIDCW) and Area Code.
TO SELECT CALLER ID OPTIONS
Press .
menu/mute
Press or to move the pointer to
+ -
" ",
Caller ID Setup
then press .
select/ch
Press or to move the pointer to an option,
+ -
then press .
select/ch
Press + or - to change the option setting.
Press and return the handset to
select/ch
the base.
TO CHOOSE THE LANGUAGE
Press .
menu/mute
Press or to move the pointer to "
+ -
Language
then press .
select/ch
Press or to change the option setting.
+ -
Press and return the handset to
select/ch
the base.
",