Setting Caller Id Options - Inter-Tel INT1100 User Manual

Setting Caller ID Options

There are three Caller ID setup options available: AutoTalk, CIDCW (Caller ID on Call Waiting),
and Area Code. See page 14 for Area Code setup instructions.
AutoTalk allows you to answer the phone without pressing talk/flash or spkr. If the phone rings
when AutoTalk is On, simply remove the handset from the base and the phone automatically
answers the call. Or if the handset is not in the base, press any number key,
answer the call. If you set AutoTalk to Off, you must press talk/flash or spkr to answer the call.
Caller ID on Call Waiting (CIDCW) performs the same as regular Caller ID on a call waiting
number. CW Deluxe allows you to handle call waiting calls in seven different ways. (See page 36.)
You must subscribe to CIDCW from your phone company in order to use this feature.
The CW Deluxe is a separate service available through your phone company.
To change your Caller ID options:
1) When the phone is in the standby mode, press menu/mute.
2) Press + or - to move the pointer to "
press select/ch.
3) Press + or - to choose "
then press select/ch.
4) Press + or - to change the selection.
AutoTalk: "
Auto Talk On
CIDCW: " ", "
CIDCW On
5) Press select/ch and you will hear a confirmation tone.
6) Press end to exit.
Caller ID Setup
" or " ",
Auto Talk CIDCW
" or " "
Auto Talk Off
" or "
CW Deluxe On CIDCW Off
/tone, or # to
", then
"
G E T T I N G S T A R T E D [ 13 ]