Tp (Traffic Program); Rt (Radio Text) - Denon DNP-720AE Owner's Manual

ENGliSh
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
[TUNER]
[2]
[TUNER PRESET]
[TUNING df]
[PRESET +, –]
[MODE]
[MENU]
[ENTER]
uio p
[HOME]
[SEARCH]
[NUMBER]
(0 – 9, +10)
[CLEAR]
30
TP (Traffi c Program)
TP identifi es programs that carry traffi c announcements.
BUTTON
This allows you to easily fi nd out the latest traffi c conditions in your
<BUTTON>
area before leaving home.
[BUTTON]
n TP Search
Use this function to fi nd RDS stations broadcasting traffi c programs
uio p
(TP stations).
1
Press [TUNER]
"TUNER (FM)".
• For details on selecting the input source using the unit buttons, see
"Selecting the input source using unit operations" (vpage 8).
<1/3 ENTER>
2
[SEARCH]
Press
3
Use ui to select "TP Search", then press
< / ENTER>
1 3
Automatically begin the TP search operation.
• "No Programme" is displayed when there is no traffi c information
broadcast station.
to switch the input source to
.
[ENTER] ,
p
or .
Tuning in radio stations

RT (Radio Text)

RT allows RDS stations to send text messages that appear on the
display.
• When the RT mode is turned on while an RDS broadcast station not
offering an RT service is tuned in, "NO TEXT" is displayed on the
display.
• The RT mode cannot be set in the AM band or for FM stations not
offering RDS broadcasts.
NOTE
The operations described below selecting "RDS Search" will not
function in areas in which there are no RDS broadcasts.
n Tuner (FM/AM) operation
Operation buttons Function
PRESET +, – Preset channel selection
TUNER PRESET Preset menu
2 Stop
TUNING df
Tuning (up/down)
MENU Menu
MODE Switch search modes
Cursor operation (Up/Down/Left/Right)
uio p
ENTER Enter
SEARCH
RDS search / PTY search / TP search / Auto preset
HOME Return to top page
0 – 9, +10
Preset channel selection