Other Network Settings - Denon DNP-720AE Owner's Manual

n Participating in the party mode as an attendee
• When the organizer starts the party mode, up to four attendees
are selected automatically. No operation is required.
• When a device becomes an attendee, "Party Mode Attendee"
appears on the display. The input source automatically switches
to "Music Server" and the same network audio as on the
organizer is played.
• If there are fewer than four attendees, a device can join the
party mode after it has started. To participate in the party mode,
perform the operation described below.
1
Press [PARTY MODE] .
"Party Mode" menu appears.
2
ui
Use to select "Start Party", then press
< / ENTER> or p .
1 3
• "No Network Connection" is displayed when you are not
connected to a network.
Selecting tracks from attendees
When the party mode starts, "Party Mode Attendee" appears on the
attendee's display, after which the organizer's playback information
appears.
Top 40
I Gotta Feeling
P A 100%
Party Mode Display Attendee Display
1
Press o to display the organizer's input source.
---------------------------------
Internet Radio
Music Server
2
Press ui to select the input source, then press
[ENTER] <1/3 ENTER> p
, or .
3
ui
Press to select the item you want to play, then
press [ENTER] , <1/3 ENTER>
Canceling the party mode
1
Press [PARTY MODE]
"Party Mode" menu appears.
2
ui
Use
< / ENTER>
1 3
"Exit Party Mode?" is displayed.
3
ui
Use
< / ENTER>
1 3
In this case, the other devices remain in the party mode.
[ENTER]
,
• "Last.fm", "Napster" and "USB" are not available in the Party
Mode.
• There can only be one organizer in the network. To form a new party
mode, first cancel the current party mode.
1/3
0:21
1/3
or p .
.
[ENTER]
to select "Stop Party", then press
or p .
[ENTER]
to select "Yes", then press ,
or p .
Setting the network [Network]

Other network settings

n Network Standby
Set the network function On/Off during standby.
1
[MENU]
Press .
,
Turns on the Menu settings mode and the Menu appears on
the display (vpage 20 "Menu map").
2
Use ui to select "Network" – "Other Network" –
"Network Standby", then press
< / ENTER> or p .
1 3
"Network Standby" menu appears.
3
ui
Use to "Network On", then press
< / ENTER> or p .
1 3
Network On Network is on during standby. Main unit operable with
a network compatible controller. Shortens the time
before the network connection is completed.
• When "Network Standby" is set to "Network On",
the power display lights orange.
• More power is consumed when in standby (Power
consumption: 7.5 W).
Network Off Suspend network function during standby. It will take
slightly longer till the network connection is completed.
• The minimum amount of power is consumed when
in standby (Power consumption: 0.2 W).
• This is the default setting.
4
Press [MENU] .
The display returns to normal.
ENGliSh
[ENTER]
,
[ENTER]
,
25