Tuning In Radio Stations; Listening To Fm/Am Broadcasts; Automatically Presetting Fm Stations (Auto Preset) - Denon DNP-720AE Owner's Manual

Network audio playback
n Switching the display
During playback, Press [DISPLAY] .
The file type/bit rate, artist name and album name are displayed.
n Napster operation
Operation buttons Function
8 9 Auto search (cue)
1/3 Playback
2 Stop
MENU Menu
uio p Cursor operation / Auto search (cue, ui)
ENTER Enter
SEARCH Search menu
HOME Return to top page
REPEAT
Repeat playback (vpage 18)
RANDOM Random playback (vpage 18)

Tuning in radio stations

Connect the antenna beforehand (vpage 5).

Listening to FM/AM broadcasts

1
Press [TUNER] to select the reception band.
The reception band is toggled as shown below each time
[TUNER]
is pressed.
FM When listening to an FM broadcast.
AM When listening to an AM broadcast.
• The reception band can also be selected by pressing
(vpage 8).
2
Tune in the desired broadcast station.
When a station is received, the will light.
Auto tuning To tune in automatically.
[MODE]
q Press , and "AUTO" lights in the display.
[TUNING ] [TUNING ]
d f
w Press or to select the station you want
to hear.
Manual tuning To tune in manually.
[MODE]
q Press , and "AUTO" goes out in the display.
[TUNING ] [TUNING ]
w Press d or f to select the station you want
to hear.
• If the desired station cannot be tuned in with auto tuning, tune it in
manually.
• When tuning in stations manually, press and hold
[TUNING ]
f to change frequencies continuously.
• A humming sound may be heard when using a TV nearby while
receiving AM programs. If this happens, move the system as far
from the TV as possible.
n To stop auto tuning
[TUNING d] [TUNING f]
Press or .
Automatically presetting FM stations
(Auto Preset)
• This unit can be preset with a total of 99, FM broadcast stations.
• Perform this operation when tuned to an FM broadcast station.
NOTE
Auto preset is not possible with AM broadcast stations.
1
Press [SEARCH] .
"Auto Preset" menu appears.
<SOURCE>
2
ui
Use to select "Start", then press
< / ENTER> or
1 3
"Searching" appears in the display, and the unit searches for
radio stations. When the search is complete, "Complete!!"
appears.
Canceling auto presetting
[2]
Press .
NOTE
• Broadcast stations whose antenna signal are weak cannot be preset
automatically. If you wish to preset such stations, tune them in
manually.
• If number that was already assigned as a preset is selected, the old
preset information is overwritten with the new information.
[TUNING ]
d or
ENGliSh
[ENTER]
,
p .
13