Playing Back In Your Preferred Order (Program Playback); Switching Audio - Denon DBP-4010UD Owner's Manual

Playing Back in Your Preferred Order
(Program Playback)
You can program up to a maximum of 20 tracks.
1
Press during stop.
The "PROG" indicator lights on the display, and the program
setting screen appears.
PROGRAM Track 1 - 16
No. Track No.
1 5 11
2 2 12
3 3 13
4 - - 14
5 15
6 16
7 17
8 18
9 19
10 20
0-9 +10 Enter CLEAR
2
Enter the track numbers you want
to program on the program setting
screen.
~ , ············································· Entry
·············································· Decision entry
3
Press .
Playback begins in the programmed order.
Checking the Program Contents
n
Press setting playback.
The program setting screen will appear.
You can also check the contents of the program, which appears on
the unit's display. Press during stop.
Erasing Programmed Tracks One by One
n
Press during stop.
Erasing All Programmed Contents
SA-CD CD
n
Press .

Switching Audio

Total Time 3 : 32
With discs and files that have multiple audio track recording, you
Track
can change the audio during playback.
With BD, you can set sub-track audio such as interactive audio and
commentary audio, etc., with "Secondary".
Switching a BD's Primary Audio/Secondary Audio
1
During playback of an Primary Audio/Secondary
Audio title, press
Clear
The audio number currently being played is displayed.
Audio
Primary 1/5 : Dolby Digital 3/2.1 English
Secondary
–/1 : Off
2
Press
"Secondary", and then press
Audio
Primary
1/5 : Dolby Digital 3/2.1 English
Secondary
–/1 : Off
If multiple audio items are recorded, "the current
b
audio number/number of recorded audio items"
is displayed.
When "BD Audio Mode" is set to "HD Audio
b
Output" (vpage 32), "Secondary" audio is not
output.
BD DVD-A DVD-V DVD CD SD
DivX
.
, select "Primary" or
.
Operations Enabled During Playback
3
Select your desired audio language with
Audio
Primary
2/5 : Dolby Digital 3/2.1 Japanese
Secondary
–/1 : Off
4
Press .
The setup screen disappears.
• Depending on the disc, audio switching may be restricted to
operation of the disc menu. In this case, switch the audio on the
disc menu.
• Be sure to set "BD Audio Mode" to "Mix Audio Output" (vpage
32) for playing back secondary audio.
• Depending on the BD, even if picture-in-picture playback is set to
"Off", Secondary Audio only may be output.
ENGLISH
.